Zennio-Presentia W*
Presence detector for flush mounted in wall into 55×55 frame, with a detection area of 180º and up to 10 meters length of detection. It includes several channels to be configured for lighting switching control according to luminosity threshold or according to presence detection only. It has two independent sensors whose sensitivity settings can be adjusted for each sensor individually. Master/slave configuration allows using several detectors for larger areas. In addition, Presentia W1 and Presentia W2 incorporate one or two capacitive push buttons with back-lighted LED icons which can be used for any kind of room control. Installation in standard mounting box with 55×55 frames of 1/2/3/4 modules (white, gloss white, anthracite or silver). Frame no included
Estimated availability (subject to changes): 4th Quarter 2018
Zennio-Presentia W*
ردیاب حضور برای نصب همسطح داخل دیوار در قاب 55×55 میلیمتر، با سطح تشخیص 180 درجه و طول تشخیص تا 10 متر. مناسب با قاب، کلید و پریز Tecla 55، خانواده Flat 55 و Zennio ZS55. این شامل چندین کانال است که برای کنترل سوئیچینگ روشنایی با توجه به آستانه درخشندگی یا فقط بر اساس تشخیص حضور پیکربندی می شوند. دارای دو سنسور مستقل است که تنظیمات حساسیت آنها را می توان برای هر سنسور جداگانه تنظیم کرد. پیکربندی Master/Slave امکان استفاده از چندین آشکارساز را برای مناطق بزرگتر می دهد. نصب در جعبه نصب استاندارد با فریم 55×55 ماژول 1/2/3/4 (سفید، آنتراسیت یا نقره ای). قاب گنجانده نشده است.
Zennio-Presentia W*